termometer ready

Menampilkan hasil 11–20 dari 24

Extech TL708: Heavy Duty Large Alligator Clips
Toothed jaws for solid gripping of fine wires
Beli
Extech TL726: Double Molded Silicone Test Lead Set
Right angle and straight end flexible leads with shrouded banana plugs
Beli
Extech TL740: Industrial Plunger Style Test Clip Set
Spring loaded clip with steel jaws
Beli
Extech TL744: Flat Blade Test Probe Set
Designed to fit outlet receptacles
Beli
Extech TL803: General Purpose Test Leads
Standard test leads with protective tip caps
Beli
Extech TL805: Double Injected Test Leads
Double molded test leads with non-slip comfort grip
Beli

Specifications	Range
Measurement ranges	20A, 200A and 1200A, switch selectable
Output sensitivity	10mV/A on the 20A range
	1mV/A on the 200A range
	0.1mV/A on the 1200A range
Output coupling	AC coupled.
Accuracy (50/60Hz)	± 1% F.S. @ 23 ± 5°C
Frequency range	45 to 400 Hz.
Phase error (50/60Hz)	< ± 1°
Minimum load	100 K ohm for specified accuracy
Enclosure material	UL 94-V0 rated
Safety	IEC 1010, Category III 600V
Power Supply	8V± 1V (supplied from meter)
Max. Jaw Open Size	50 mm (2.0 inch) Dia.
Operating Temperature	0°C to 50°C (32°F to 122°F)
Operating Humidity	Less than 80% RH
Dimension	210 x 64 x 33 mm. (8.3 X 2.5 X 1.3″inch )
Cable length :	4 meters (13.17 feet)
DC plug size :	5.5 mm x 2.5 mm DIA.
Weight	490 g (1.08 LB)
Safety	For indoor use and in accordance with the requirements for indoor use, double insulation to IEC1010-1 (2001):
Safety	EN61010-1 (2001) Overvoltage Category III 600V,, Pollution Degree 2.

Specifications	Range
Temperature Range	-4 to 450°F (-20 to 232°C)
Sensor Type	Type K curved thermocouple element
Accuracy	±3.6°F (1.8°C)
Pipe size	0.25″ (6.35mm) to 1.5″ (38mm) diameter
Cable length	36″ (0.9m)

Extech TP830 Extech TP830: Thermistor Probe
0.78″ (2cm) Stainless Steel Thermistor Probe with 39″ (1m) cable
Beli
Extech TP832: Thermistor Probe (-22 To 158°F/-30 To 70°C)
Beli

Toothed jaws for solid gripping of fine wires